Water Purification Using Chlorine Dioxide

Chlorine Dioxide for Water Storage & Emergency Water Treatment (NOTE - 1ML of CDS equals 3 activated drops of sodium chlorite solution)

Chlorine Dioxide for POTABLE WATER STORAGE

Be sure container is clean. Add 2 drops of UNACTIVATED 22.4% Sodium Chlorite for each gallon (4 liters). Seal tightly. Water will stay fresh, taste great, and be odor free. When you open the water, add 1 drop for each remaining gallon (4 liters) and reseal.

Chlorine Dioxide for NON-POTABLE WATER STORAGE

Clean tank with a strong solution. Rinse well. Fill with water and add 2 drops of UNACTIVATED 22.4% Sodium Chlorite per gallon (4 liters) of supply. This can apply to water systems for horticulture, rain barrels, and agricultural water tanks.

Chlorine Dioxide for EMERGENCY WATER TREATMENT

Water from a suspect source.

In an emergency situation, Activated 22.4% Sodium Chlorite can help suspect water supplies to be more environmentally friendly.

Chlorine Dioxide for FOR WATER-ON-DEMAND: Activate 4 drops of 22.4% Sodium Chlorite and let activate for 10 minutes (covered). Add to 1 gallon (4 liters) of water. Wait at least one hour before using.

BEST METHOD: Use 3 to 4 drops of Unactivated 22.4% Sodium Chlorite to 1 gallon (4 liters) of water and let stand at least 12 hours. Please note these directions are only for emergency situations.

Also, a Google search will readily provide EPA registered Chlorine Dioxide water treatments.